Nuuoffset; Password; Port - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

Two specialized configurations that require turning off automatic database recovery are described in
Section 38.2.2, "Configuring a Dedicated Message File Processing POA," on page 567
Section 38.3.3, "Configuring a Dedicated Indexing POA," on page

39.79 /nuuoffset

Specifies the number of hours after midnight for the POA to start performing user upkeep. The
default is 1 hour; valid values range from 0 to 23. See
Upkeep," on page
Syntax:
Example:
See also /nonuu.

39.80 /password

Provides the password for the POA to use when accessing post offices or document storage areas on
remote servers. You can also provide user and password information on the Post Office Settings
page in ConsoleOne.
NetWare POA
Syntax: /password-NetWare_password --password
Exampl /password-GWise
e:
See also /user

39.81 /port

Sets the TCP port number used for the POA to communicate with GroupWise clients in client/server
access mode. The default is 1677. See
Office," on page
Syntax:
Example:
See also /ip.
608 GroupWise 8 Administration Guide
526.
NetWare POA Linux POA
/nuuoffset-hours --nuuoffset hours
/nuuoffset-2 --nuuoffset 3
and /dn.
498.
NetWare POA
/port-port_number
/port-1678
Section 36.4.3, "Performing Nightly User
Linux POA
network_password
--password GWise
Section 36.2.1, "Using Client/Server Access to the Post
Linux POA
--port port_number
--port 1679
and
571.
Windows POA
/nuuoffset-hours
/nuuoffset-4
Windows POA
/password-
network_password
/password-GWise
Windows POA
/port-port_number
/port-1680