Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 672

For explanations of messages in the MTA log file, see
GroupWise 8 Troubleshooting 1: Error
MTA Web Console You can view and search MTA log files on the
Cycling the MTA Log File
You can have the MTA start a new log file as needed.
1 At the server where the MTA is running, display the MTA server console.
2 Click Log > Cycle Log.
NetWare Note: Use Options (F10) > Cycle Log File.
Adjusting MTA Log Settings
Default log settings are established when you start the MTA. However, they can be adjusted for the
current MTA session from the MTA server console.
1 At the server where the MTA is running, display the MTA server console.
2 Click Log > Log Settings.
NetWare Note: Use Options (F10) > Log Settings.
3 Adjust the values as needed for the current MTA session.
See Section 42.3, "Using MTA Log Files," on page
MTA Web Console You can adjust MTA log settings from the
Log Settings heading.
Editing the MTA Startup File
You can change the configuration of the MTA by editing the MTA startup file from the MTA server
console.
1 At the server where the MTA is running, display the MTA server console.
2 Click Configuration > Edit Startup File.
NetWare Note: Use Options > Actions > Edit Startup File.
3 Make the necessary changes, then save and exit the startup file.
4 Stop and restart the MTA.
Accessing Online Help for the MTA
Click Help on the menu bar for information about the MTA server console. Click the Help button in
any dialog box for additional information.
NetWare Note: Press F1 for information in any dialog box or menu.
672 GroupWise 8 Administration Guide
"Message Transfer Agent Error
Messages.
681.
Configuration
Messages" in
Log Files page.
page. Click the Event