Dhome; Home - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

/home

The following switches are only for the NetWare version of the GroupWise Internet Agent, and are
only required if the Internet Agent is running in remote mode, meaning that it does not reside on the
same server as the GroupWise domain directory.
/user
/password

52.3.1 /dhome

Points to the SMTP service work area. This is normally the Internet Agent's gateway directory
under the domain\wpgate directory. See Section 50.1, "Relocating the Internet Agent's Processing
Directories," on page 817.
Syntax: /dhome=pathname
NetWare Example: /dhome=sys:\headq\wpgate\gwia
Linux Example: -dhome /gwsystem/provo1/gwia
Windows Example: /dhome=c:\gwsystem\provo2\gwia
52.3.2 /hn
Specifies the hostname that is displayed when someone connects to your Internet Agent using a
Telnet session. You should enter the hostname assigned to you by your Internet service provider.
Syntax: /hn=host_name
Example: /hn=gwia.novell.com
This switch is required only under certain circumstances. Normally, the Internet Agent gets the
information from another source and does not need this switch. If you receive a message that the /hn
switch is required, you must use the switch.
For the NetWare version, the /hn switch is required only if you don't use the hosts file in the sys:\etc
directory to indicate the IP address and name of the Internet Agent server. If either of these options
(the IP address or the name of the server) is not available, the program cannot start.
52.3.3 /home
Points the Internet Agent to the Internet Agent's gateway directory. This is always a subdirectory of
in the domain directory structure.
wpgate
Syntax: /home=gateway_directory
NetWare Example: /home=sys:\headq\wpgate\gwia
Linux Example: -home /gwsystem/provo1/gwia
Windows Example: /home=j:\headq\wpgate\gwia
840 GroupWise 8 Administration Guide