Filtering The Agent List; Adding All Agents On A Server - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

Section 63.1.2, "Adding All Agents on a Server," on page 1009
Section 63.1.3, "Adding All Agents on a Subnet," on page 1010
Section 63.1.4, "Adding an Individual Agent," on page 1010
Section 63.1.5, "Removing Added Agents," on page 1011

63.1.1 Filtering the Agent List

You can configure the Monitor Agent to stop and start monitoring selected agents as needed.
At the Windows Monitor Agent server
1 Click Configuration > Filter.
or
On Linux, at the Monitor Agent Web
The Filtered Out list displays all agents that are not currently being monitored.
2 Select one or more agents in the Monitored list, then click Remove to move them to the Filtered
Out list.
3 Click OK.
Agents in the Filtered Out list are not monitored and do not appear at the Monitor Agent server
console or at the Monitor Agent Web console. To start monitoring a filtered-out agent, move it back
to the Monitored list.

63.1.2 Adding All Agents on a Server

If you add a new server to your GroupWise system or want to monitor agents in a different
GroupWise system, you can easily start monitoring all the agents running on that server.
At the Windows Monitor Agent server
1 Click Configuration > Add from Machine.
or
On Linux, at the Monitor Agent Web
console:
console, click Preferences > Filter.
console:
console, click Preferences > Add Agents.
Configuring the Monitor Agent 1009