Selecting An Mta To Communicate With The Monitor Agent - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

round-trip time for e-mail messages to travel to recipients and for status messages to travel
back to senders. If you are going to set up gateway accounting reports, as described in
Section 65.5, "Collecting Gateway Accounting Data," on page
external domain for collecting accounting data.
2 Name the external domain to reflect its role in your GroupWise system.
For example, you could name it ExternalMonitorDomain. It does not matter which domain you
link the external domain to.
3 Continue with
Section 65.4.2, "Selecting an MTA to Communicate with the Monitor Agent,"
on page 1053.
65.4.2 Selecting an MTA to Communicate with the Monitor
Agent
The Monitor Agent needs to send its performance testing messages to a specific MTA in your
GroupWise system. It does not matter which MTA you decide to use. It could be the MTA for the
domain to which the external Monitor domain is linked.
1 In ConsoleOne, click Tools > GroupWise Utilities > Link Configuration.
2 In the Outbound Links From box, double-click the domain whose MTA you want the Monitor
Agent to communicate with.
3 Configure the outbound link from the selected MTA to the external Monitor domain to be a
TCP/IP link:
3a Click the pencil icon to provide the IP address of the server where the Monitor Agent runs.
1055, you can use this same
Using GroupWise Monitor 1053