Binding The Webaccess Agent To A Specific Ip Address; Configuring The Webaccess Application - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

3 To change the WebAccess Agent's IP address, click the pencil icon to display the Edit Network
Address dialog box.
4 Change the IP address or DNS hostname as necessary, then click OK to return to the Network
Address page.
5 To change the port numbers used by the WebAccess Agent, type the new port number in the
appropriate field.
HTTP Port: This is the port used to listen for requests from its Web console. The default port
number is 7211.
TCP Port: This is the port used to listen for requests from the WebAccess Application and
WebPublisher Application. The default port is 7205.
6 Click OK to save the changes.

54.1.6 Binding the WebAccess Agent to a Specific IP Address

You can now cause the WebAccess Agent to bind to a specified IP address when the server where it
runs uses multiple IP addresses. The specified IP address is associated with all ports used by the
agent. Without an exclusive bind, the WebAccess Agent binds to all IP addresses available on the
server. Use the
IP address that you want the WebAccess Agent to bind to.

54.2 Configuring the WebAccess Application

The WebAccess Application, which resides on the Web server, provides the WebAccess user
interface. As users perform actions in the WebAccess client, the WebAccess Application passes
information between the Web browser and the WebAccess Agent.
Figure 54-4
Web
Browser
900 GroupWise 8 Administration Guide
/ip startup switch in the WebAccess Agent startup file (
WebAccess Application
Speller
Application
WebAccess
Application
Web
Server
WebPublisher
Application
LDAP
Server
LDAP Provider
GroupWise Provider
WebAccess
Agent
Document
Service Provider
Viewer
Agent
) to specify the
webac80.waa
Post Office
Library