Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 946

WebAccess Agent Server Console
Figure 56-1
The console and its options are described below.
Up Time
The Up Time field displays how long it has been since the WebAccess Agent was started.
Threads
The default of 12 threads enables the WebAccess Agent to service 12 user requests at one time. The
Busy field displays the number of threads that are currently servicing user requests. The Total field
displays the total number of threads available to service requests (by default, 12). The Peak field
displays the most threads used at one time to service requests. If all threads are busy much of the
time, you can increase the number of threads available for use. See Section 54.1.1, "Modifying
WebAccess Settings," on page 892.
Users In
The Users In field displays the number of users who currently are logged in. During startup, if you
have enabled WebPublisher, the WebAccess Agent logs in one time for each available thread; these
logins are reflected in the Users In fields. The Total field displays the total number of users who
have logged in during the current up time. The Peak field displays the most users who have been
logged in at one time.
By default, a maximum of 250 users can be logged in at one time. You can use the /maxusers startup
switch to change the default. See Section 57, "Using WebAccess Startup Switches," on page 965.
Requests
The Total field displays the total number of requests the WebAccess Agent has processed during its
current up time. The Errors field lists the number of requests that could not be processed because of
errors.
946 GroupWise 8 Administration Guide