Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 499

Configure the POA so network management and monitoring programs can use TCP/IP to send
SNMP requests to this POA
Set up an external server with Internet access for the POA
Configure the POA to provide a Web console for use with GroupWise Monitor
Configure the POA to communicate with IMAP (Internet Message Application Protocol)
clients
Configure the POA to communicate with SOAP (Simple Object Access Protocol) clients
Configure the POA for calendar publishing so that users' calendars can be viewed on the
Internet
To make sure the GroupWise client has proper client/server access to the post office:
1 Make sure TCP/IP is properly set up on the server where the POA is running.
2 In ConsoleOne, browse to and right-click the POA object, then click Properties.
3 Click GroupWise > Agent Settings to display the Agent Settings page.
4 Make sure that Enable Client/Server is selected.
The default numbers of physical connections and application connections are appropriate for a
post office with as many as 500 users. If you are configuring the POA to service more than 500
users, see Section 38.1.2, "Adjusting the Number of Connections for Client/Server
Processing," on page 563
insufficient connections can result in error conditions.
5 Click GroupWise > Network Address.
for more detailed recommendations. Configuring the POA with
Configuring the POA 499