Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 494

5 In the Message Transfer field, specify the TCP port on which the POA will listen for incoming
messages from the MTA.
The default message transfer port for the POA to listen on is 7101.
6 Click OK to save the TCP/IP information and return to the main ConsoleOne window.
Corresponding Startup Switches You can also use the
switches in the POA startup file to set the incoming IP address and port.
Changing the Link between the Post Office and the Domain to TCP/IP
1 In ConsoleOne, click Tools > GroupWise Utilities > Link Configuration.
2 In the drop-down list, select the domain where the post office resides.
3 Click Post Office Links, then double-click the post office for which you want to change the link
protocol.
4 In the Protocol field, select TCP/IP.
5 Make sure the information displayed in the Edit Post Office Link dialog box matches the
information on the Network Address page for the POA.
6 Click OK.
7 To exit the Link Configuration tool and save your changes, click File > Exit > Yes.
ConsoleOne then notifies the POA and MTA to restart using the new link protocol.
494 GroupWise 8 Administration Guide
/mtpinipaddr and /mtpinport startup