Enabling Groupwise Check In The Windows Client; Using Groupwise Check With The Linux/Mac Client - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

72.2.1 Enabling GroupWise Check in the Windows Client

GroupWise Check can be installed with the GroupWise Windows client (unless you have specified
in setup.cfg that it not be installed), and is available by clicking Tools > Repair Mailbox in the client
in Caching and Remote modes after you complete the following:
1 Locate the directory named
installed (usually
2 Locate
3 Copy all the files in
You can now run GroupWise Check in Caching and Remote mode. The GroupWise Check dialog
box is titled GroupWise Mailbox Maintenance. You can also use Ctrl+Shift when accessing a
Caching or Remote mailbox to run GroupWise Check before opening the mailbox.
For detailed information about GroupWise Check, click Help or see
Check," on page

72.2.2 Using GroupWise Check with the Linux/Mac Client

GroupWise Check is not accessible from the Linux/Mac client but can be installed on a Linux
workstation if you need to repair local databases. For installation instructions, see
"Using GWCheck on Linux," on page
GWCheck is installed by default on the Linux/Mac client for Macintosh. You must start GWCheck
from a terminal window on a Macintosh. For further instructions, see
GWCheck on Macintosh," on page
1144 GroupWise 8 Administration Guide
gwcheck
c:\Program Files\Novell\GroupWise
. It is usually in
grpwise.exe
to the directory where
gwcheck
439.
444.
. This is a subdirectory of the directory where the client is
c:\Program Files\Novell\GroupWise
grpwise.exe
442.
).
.
is located.
Section 34.1, "GroupWise
Section 34.1.3,
Section 34.1.4, "Using