Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 962

NetWare:
OES Linux:
SLES:
Windows:
To modify the application log settings:
1 In ConsoleOne, browse to and select the Domain object where the application object is located.
2 Right-click the application object (GroupWiseWebAccess, or GroupWiseWebPublisher), then
click Properties.
3 Click Application > Log Settings to display the Log Settings page.
The Log Settings pages for the WebAccess Application and the WebPublisher Application are
the same.
4 Modify any of the following properties:
Log File Path: Specify the path to the directory where you want to store the log files.
Maximum Log File Age: Specify the number of days you want to retain the log files. The
WebAccess application retains the log file for the specified number of days unless the
maximum disk space for the log files is exceeded. The default age is 30 days.
Maximum Log Disk Space: Specify the maximum amount of disk space you want to use for
application log files. If the disk space limit is exceeded, the WebAccess application deletes log
files, beginning with the oldest file, until the limit is no longer exceeded. The default disk space
is 102400 KB (100 MB).
Logging Level: There are four logging levels: None, Normal, Verbose, and Diagnostic. None
turns logging off; Normal displays warnings and errors; Verbose displays Normal logging plus
information messages and user requests; and Diagnostic displays all possible information. The
default is Normal logging. Use Diagnostic only if you are troubleshooting a problem with
962 GroupWise 8 Administration Guide
sys:\Novell\GroupWise\WebAccess\logs
/var/opt/novell/groupwise/webaccess/logs
/var/opt/novell/groupwise/webaccess/logs
c:\Novell\GroupWise\WebAccess\logs
on the Web server
on the Web server