Cluster; Cyhi; Cylo; Defaultroutingdomain - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

44.4 /cluster

Informs the MTA that it is running in a cluster. A clustered MTA automatically binds to the IP
address configured for the MTA object even if the Bind Exclusively to TCP/IP Address option is not
selected on the MTA Network Address page in ConsoleOne. This prevents unintended connections
to other IP addresses, such as the loopback address or the node's physical IP address. For
information about clustering the MTA, see the
NetWare MTA
Syntax: /cluster
See also /ip.

44.5 /cyhi

Sets the number of seconds in the scan cycle that the MTA uses to scan its priority 0-1 input queues.
The default is 5 seconds. See
Domain, Post Offices, and Gateways," on page
Syntax:
Example:
See also /cylo.

44.6 /cylo

Sets the number of seconds in the scan cycle that the MTA uses to scan its priority 2-7 input queues.
The default is 15 seconds. See
Domain, Post Offices, and Gateways," on page
Syntax:
Example:
See also /cyhi.

44.7 /defaultroutingdomain

Identifies the domain name in your GroupWise
when they cannot resolve the available routing information to a specific user.post_office.domain
GroupWise address. See
700 GroupWise 8 Administration Guide
Linux MTA
--cluster
Section 43.2.2, "Adjusting MTA Polling of Input Queues in the
NetWare MTA
/cyhi-seconds
/cyhi-3
Section 43.2.2, "Adjusting MTA Polling of Input Queues in the
NetWare MTA
/cylo-seconds
/cylo-10
Section 41.3.1, "Using Routing Domains," on page
GroupWise 8 Interoperability
690.
Linux MTA
--cyhi-seconds
--cyhi 3
690.
Linux MTA
--cylo-seconds
--cylo 10
®
system to which all MTAs should send messages
Guide.
Windows MTA
/cluster
Windows MTA
/cyhi-seconds
/cyhi-3
Windows MTA
/cylo-seconds
/cylo-10
646.