Configuring A Dedicated Client/Server Poa - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

5 Click OK to save the new connection settings.
ConsoleOne then notifies the POA to restart so the new connection settings can be put into
effect.
Corresponding Startup Switches You can also use the
switches in the POA startup file to adjust the POA client/server processing.
POA Web Console The
client/server needs of the post office. Under the Statistics heading, click C/S Requests Pending. You
can also manually select multiple log files to search in order to display a history of times during the
last 24 hours when the POA was unable to respond immediately to client/server requests.

38.1.3 Configuring a Dedicated Client/Server POA

When GroupWise users access the post office in client/server mode, the responsiveness of the
GroupWise client depends entirely on the ability of the POA to handle the load placed upon it by the
users. When you configure a dedicated client/server POA, GroupWise client users do not compete
with other POA activities.
Because many POA functions are disabled when a POA is dedicated to client/server processing, you
must run at least one other POA for the post office to take care of the POA functions that the
dedicated client/server POA is not performing. This additional POA could be a multipurpose POA,
or you could configure additional POAs dedicated to specific types of processing.
To configure a dedicated client/server POA:
1 Create a new POA object for the post office as described in
Object in eDirectory," on page
2 Right-click the new POA object, then click Properties.
3 Click GroupWise > Agent Settings to display the Agent Settings page.
4 Make sure Enable Client/Server is selected.
564 GroupWise 8 Administration Guide
Status page helps you assess whether the POA is currently meeting the
488.
/maxappconns and /maxphysconns
Section 36.1.1, "Creating a POA