Adjusting The Mta Logging Level And Other Log Settings - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

New Domain Location
If you move a domain from one server to another, you need to edit the MTA startup file to provide
the new location of the domain directory.
1 Stop the MTA for the old domain location if it is still running.
2 Use an ASCII text editor to edit the MTA startup file.
NetWare Only the first 8 characters of the domain name are used in the filename. The startup
and file is typically located in the directory where the MTA software is installed.
Windows:
Linux: The full domain name is used in the filename. However, all letters are lowercase and
any spaces in the domain name are removed. The startup file is located in the /opt/
novell/groupwise/agents/share directory.
3 Adjust the setting of the
4 Save the MTA startup file.
5 Start the MTA for the new domain location, as described in the following sections in the
GroupWise 8 Installation
"Starting the NetWare GroupWise
"Starting the Linux Agents with a User
"Starting the Windows GroupWise
New Post Office Location
If you move a post office, you need to adjust the link information for that post office.
1 Click Tools > GroupWise Utilities > Link Configuration.
2 In the drop-down list, select the domain where a post office has moved.
3 Click View > Post Office Links to display post office links.
4 Double-click the post office that has been moved.
5 Provide its new location in the appropriate format.
6 Click OK.
7 Click File > Exit > Yes to save the link changes.
ConsoleOne then notifies the MTA to restart with the new link configuration.
41.1.8 Adjusting the MTA Logging Level and Other Log
Settings
When installing or troubleshooting the MTA, a logging level of Verbose can be useful. However,
when the MTA is running smoothly, you can set the logging level down to Normal to conserve disk
space occupied by log files. See
/home switch to point to the new location of the domain directory.
Guide:
Agents"
Interface"
Agents"
Section 42.3, "Using MTA Log Files," on page 681.
Configuring the MTA 641