Using Paging - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

5 In the Link Type field, select Gateway.
6 In the Gateway Link field, select the Internet Agent.
7 In the Gateway Access String field, type
8 Click OK to save the information.
9 Click File > Exit > Yes to save your changes and exit the Link Configuration tool.
10 Restart the Internet Agent.

46.4.2 Using Paging

To use paging, GroupWise users must address messages to the non-GroupWise domain, specifying
the PIN number of the pager and the hostname of the paging service in the following format:
domain:pin@paging_service_provider
For example,
page:123456789@skytel.com
page:123456789@epage.arch.com
By using the /l=length and /b=number switches on the message's To line, the sender can control the
block length and number of blocks to send to the pager. For example,
page:123456789@epage.arch.com/l=128/b=4
By default, the Internet Agent sends 255 bytes per block (/l=255 /b=1).
.
-page
Configuring Internet Services 761