Configuring Authentication And Intruder Lockout For The Monitor Web Console - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

At the Windows Monitor Agent server
1 Select the root agent group to set up SNMP trap notification defaults for all monitored agents.
or
Select any agent group to set up SNMP trap notification for the agents in the selected group.
or
Select any agent to set up SNMP trap notification for that individual agent.
2 Click Configuration > Notification.
or
On Linux, at the Monitor Agent Web
> Setup to display the Notify settings.
Unless you selected the root agent group, Use Parent Notification Options is selected and all
options are dimmed. Deselect Use Parent Notification Options to set up notification for an
agent group or individual agent.
3 Select Send SNMP Traps, then click OK.
4 Make sure that the Monitor Agent is properly configured for SNMP, as described in
Section 63.3.2, "Configuring the Monitor Agent for SNMP," on page
63.8 Configuring Authentication and Intruder
Lockout for the Monitor Web Console
Accessing GroupWise agent status information from your Web browser is very convenient.
However, you might want to limit access to that information. You can configure the Monitor Agent
to request a username and password before allowing users to access the Monitor Web console. In
addition, you can configure the Monitor Agent to detect break-in attempts in the form of repeated
unsuccessful logins.
console:
console, select one or more agents, then click Preferences
1016.
Configuring the Monitor Agent 1023