Gwtmstmp Startup Switches - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

Example:
gwtmstmp.exe /p-m:\gwsystem\acct /set
A basic backup time stamp can also be set in ConsoleOne. Select a Post Office object, then click
Tools > GroupWise Utilities > Backup/Restore Mailbox. On the Backup tab, select Backup, then
click Yes.
More specialized functionality is provided through additional GWTMSTMP startup switches.

34.3.5 GWTMSTMP Startup Switches

The following startup switches can be used with GWTMSTMP:
Table 34-6
NetWare GWTMSTMP
/p
/backup
/restore
/retention
/get
/set
/clear
/date
/time
/u
/userdb
/p
Specifies the post office directory where the user databases to time-stamp are located. This switch is
required.
Syntax:
Example:
/backup, /restore, and /retention
Specifies the time stamp on which to perform the operation. If no time stamp is specified, the
operation is performed on the backup time stamp.
464 GroupWise 8 Administration Guide
GWTMSTMP Startup Switches
Linux GWTMSTMP
-p
-b or --backup
-r or --restore
-n or --retention
-g or --get
-s or --set
-c or --clear
-d or --date
-t or --time
-u or -userid
-e or --userdb
NetWare GWTMSTMP
/p-volume:\post_office_dir
/p-mail:\dev
Windows GWTMSTMP
/p
/backup
/restore
/retention
/get
/set
/clear
/date
/time
/u
/userdb
Linux GWTMSTMP
-p /post_office_dir
-p /gwsystem/dev
Windows GWTMSTMP
/p-drive:\post_office_dir
/p-j:\dev