Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 743

Hide thumbs Also See for GROUPWISE 8 - ADMINISTRATION:
Table of Contents

Advertisement

ETRN Host: Specify the IP address, or DNS hostname, of the mail server (where your mail
account resides) at your Internet Service Provider. You should obtain this address from your
Internet Service Provider. This setting corresponds with the Internet Agent's
ETRN Queue: Specify your e-mail domain as provided by your Internet Service Provider (for
example, novell.com). This setting corresponds with the Internet Agent's
Username: The Username setting applies only if you are using a Windows Remote Access
Server (RAS) and the Internet Agent is not running on the same server as the RAS.
Specify the RAS Security username. This setting corresponds with the Internet Agent's
dialuser
switch.
Password: The Password setting applies only if you are using a Windows Remote Access
Server (RAS) and the Internet Agent is not running on the same server as the RAS.
Specify the RAS Security user's password. This setting corresponds with the Internet Agent's
dialpass
switch.
4 Click OK to save the changes.
Creating a Dial-Up Schedule
After you enable the Internet Agent to use a dial-up connection, you need to schedule the times
when the Internet Agent initiates a connection.
NOTE: When the Internet Agent initiates a connection, it simply passes TCP/IP packets to the
routing service that makes the Internet connection. The routing software, not the Internet Agent, is
responsible for the actual dial-up or timeout.
The Internet Agent uses profiles to enable you to assign different dial-up criteria to different times.
For example, the default profile instructs the Internet Agent to initiate a dial-up connection
whenever an outgoing message is placed in its send queue. However, during the night, you might
want the Internet Agent to initiate a connection only after 30 outgoing messages have been queued.
In this case, you could create a profile that requires 30 messages to be queued and then apply the
profile between the hours of 11 p.m. and 7 a.m. each day.
To create a dial-up schedule:
1 In ConsoleOne, right-click the Internet Agent object, then click Properties.
2 Click SMTP/MIME > Scheduling.
/etrnhost
switch.
/etrnqueue
switch.
/
/
Configuring Internet Services 743

Advertisement

Table of Contents
loading

Table of Contents