Httprefresh; Httpssl; Httpuser; Imap - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

39.17 /httprefresh

Specifies the rate at which the POA refreshes the status information in your Web browser. The
default is 60 seconds. See
Syntax:
Example:
See also /httpuser, /httppassword, /httpport, and /httpssl.

39.18 /httpssl

Sets the availability of secure SSL communication between the POA and the POA Web console
displayed in your Web browser. Valid values are enabled and disabled. See
"Securing the Post Office with SSL Connections to the POA," on page
Syntax:
Example:
See also /certfile, /keyfile, and /keypassword.

39.19 /httpuser

Specifies the username for the POA to prompt for before allowing POA status information to be
displayed in a Web browser. Providing a username is optional. Do not use an existing eDirectory
username because the information passes over the non-secure connection between your Web
browser and the POA. See
Syntax:
Example:
See also /httppassword, /httpport, /httprefresh, and /httpssl.

39.20 /imap

Enables IMAP so that the POA can communicate with IMAP clients. Valid settings are enabled and
disabled. See
Syntax:
590 GroupWise 8 Administration Guide
Section 37.2, "Using the POA Web Console," on page
NetWare POA
/httprefresh-seconds
/httprefresh-30
NetWare POA
/httpssl-setting
/httpssl-enabled
Section 37.2, "Using the POA Web Console," on page
NetWare POA
/httpuser-unique_name
/httpuser-GWWebCon
Section 36.2.3, "Supporting IMAP Clients," on page
NetWare POA
/imap-enabled or disabled
Linux POA
--httprefresh seconds
--httprefresh 90
Linux POA
--httpssl setting
--httpssl enabled
Linux POA
--httprefresh unique_name
--httpuser GWWebCon
Linux POA
--imap enabled or disabled
544.
Windows POA
/httprefresh-seconds
/httprefresh-120
Section 36.3.3,
511.
Windows POA
/httpssl-setting
/httpssl-enabled
544.
Windows POA
/httprefresh-unique_name
/httpuser-GWWebCon
502.
Windows POA
/imap-enabled or disabled