Adding Webaccess Agents To The Groupwise Service Provider's List - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

3 Select the Override box to turn on the option.
4 In the Default WebAccess Gateway box, browse for and select the WebAccess Agent that you
want to assign as the default agent.
When you have multiple WebAccess Agents and a user logs in to GroupWise WebAccess, the
GroupWise Application running on the Web server checks to see if a default WebAccess Agent
has been assigned to the user's post office, as described in
WebAccess Agent to a Post Office," on page
to the assigned WebAccess Agent. If not, it connects to the default WebAccess Agent assigned
to the post office's domain or to one of the WebAccess Agents in its service provider list, as
described in Section 53.3.6, "Adding WebAccess Agents to the GroupWise Service Provider's
List," on page 889. If possible, you should select a WebAccess Agent that has good access to
the domain's post offices to ensure the best performance. Each post office uses the domain's
default WebAccess Agent unless you override the default at the post office level.
5 Click OK to save the changes.
53.3.6 Adding WebAccess Agents to the GroupWise Service
Provider's List
1 In ConsoleOne, right-click the GroupWise service provider object (GroupWiseProvider), then
click Properties.
2 Click Provider to display the Environment page.
Section 53.3.4, "Assigning a Default
887. If so, the WebAccess Application connects
Scaling Your WebAccess Installation 889