Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 790

For more information about POP3 and IMAP4 clients, see
Services," on page
LDAP Services," on page
To configure connections to use SSL:
1 In ConsoleOne, if the Internet Agent object's property pages are not already displayed, right-
click the Internet Agent object, then click Properties.
2 Click GroupWise > Network Address to display the Network Address page.
3 Configure the SSL settings for the following connections:
Message Transfer: Select Required if you want the Internet Agent to use a secure connection
to the MTA. The MTA must also be enabled to use SSL.
HTTP: Select Enabled to enable the Internet Agent to use a secure connection when passing
information to the Internet Agent Web console. The Web browser must also be enabled to use
SSL; if it is not, a non-secure connection is used.
SMTP: Select from the following options to configure the Internet Agent's use of secure
connections to other SMTP hosts. The SMTP host must also be enabled to use SSL or TLS
(Transport Layer Security); if it is not, a non-secure connection is used. All connections are
through port 25.
Disabled: The Internet Agent does not support SSL connections.
Enabled: The other SMTP host determines whether an SSL connection or non-SSL
connection is used with an SSL-enabled Internet Agent.
Required: The Internet Agent forces SSL connections. Non-SSL connections are denied.
POP: Select from the following options to configure the Internet Agent's use of secure
connections to POP clients:
Disabled: The Internet Agent does not support SSL connections. All connections are non-
SSL through port 110.
790 GroupWise 8 Administration Guide
752. For more information about LDAP clients, see
757.
Section 46.2, "Configuring POP3/IMAP4
Section 46.3, "Configuring