Configuring The Monitor Agent For Agent Performance Testing - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

3b Specify a unique port number for the MTA to use to communicate with the Monitor
Agent.
3c Click OK.
4 Click OK to save your changes to the link.
5 Exit the Link Configuration Tool to save the new link configuration information.
6 Continue with
Testing," on page
65.4.3 Configuring the Monitor Agent for Agent Performance
Testing
After you have created an external Monitor domain and configured a link from it to an MTA, you
are ready to configure the Monitor Agent for performance testing.
At the Windows
1 Click Configuration > Performance Testing.
or
On Linux, at the
the Performance Testing section.
2 Fill in the fields:
Domain to send messages to: Select the external Monitor domain that you configured for
system performance testing.
You might need to restart the Monitor Agent in order to see the new Monitor domain in the
drop-down list.
Send performance messages every: Specify in minutes the time interval for the Monitor
Agent to send performance test messages.
Enable GroupWise Performance Testing: Select this option to turn on performance testing.
Deselect this option when you have finished your performance testing.
Send performance messages to: Select All Agents to send performance test messages to all
domains in your GroupWise system. Select Monitored Agents to send performance test
messages only to the agents currently listed at the Monitor Agent console.
3 Click OK to put the performance testing settings into effect.
4 Continue with
or
Continue with
page 1055.
1054 GroupWise 8 Administration Guide
Section 65.4.3, "Configuring the Monitor Agent for Agent Performance
1054.
Monitor Agent server console:
Monitor Agent Web
Section 65.4.4, "Viewing Agent Performance Data," on page
Section 65.4.6, "Receiving Notification of Agent Performance Problems," on
console, click Preferences > Setup, then scroll down to
1055.