Fast0; Fast4; Help - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

NetWare MTA
Syntax: /defaultroutingdomain-
domain
Example: /defaultroutingdomain-
inethub
44.8 /dn
®
Specifies the Novell eDirectory
logging into remote servers and authenticating to eDirectory. It can be used instead of the
password switches.
NetWare MTA
Syntax: /dn-distinguished_name
Example: /dn-MTA.provo2.GroupWise

44.9 /fast0

Causes the MTA to monitor and process the priority 0 and 1 subdirectories independently with
separate scanner threads, rather than in sequence with the same scanner thread. See
"Adjusting the Number of MTA Scanner Threads for the Domain and Post Offices," on page
NetWare MTA
Syntax: /fast0
See also /fast4.

44.10 /fast4

Causes the MTA to monitor and process the priority 2 and 3 subdirectories with a separate scanner
thread from the priority 4 through 7 subdirectories. See
MTA Scanner Threads for the Domain and Post Offices," on page
NetWare MTA
Syntax: /fast4
See also /fast0.

44.11 /help

Displays the MTA startup switch Help information. When this switch is used, the MTA does not
start.
Linux MTA
--defaultroutingdomain
domain
--defaultroutingdomain
inethub
distinguished name of the NetWare MTA object to facilitate
TM
Linux MTA
N/A
N/A
Linux MTA
--fast0
Section 43.2.3, "Adjusting the Number of
Linux MTA
--fast4
Windows MTA
/defaultroutingdomain-domain
/defaultroutingdomain-inethub
/user
Windows MTA
N/A
N/A
Section 43.2.3,
Windows MTA
/fast0
692.
Windows MTA
/fast4
Using MTA Startup Switches 701
and /
692.