52.9 HTTP (Web Console) Switches
The following switches enable the HTTP Web console and control its configuration settings. The
Web console enables you to monitor the Internet Agent through a Web browser. For more
information, see
Section 49.2, "Using the Internet Agent Web Console," on page
805.
/httpport
/httpuser
/httppassword
/httprefresh
/httpssl
52.9.1 /httpport
Specifies the port where the Internet Agent listens for the Web console. The default port established
during installation is 9850.
Syntax: /httpport-port_number
Example: /httpport-9851
52.9.2 /httpuser
By default, any user who knows the Internet Agent's address and port (/httpport) can use the Web
console. This switch adds security to the Web console by forcing users to log into the Web console
using the specified username. The
/httppassword
switch must also be used to establish the user
password.
Syntax: /httpuser-username
Example: /httpuser-gwia
The username can be any arbitrary name.
52.9.3 /httppassword
Specifies the password that must be supplied along with the username provided by /httpuser.
Syntax: /httppassword-password
Example: /httppassword-monitor
52.9.4 /httprefresh
By default, the Internet Agent refreshes the Web console information every 60 seconds. You can use
this switch to override the default refresh interval.
Syntax: /httprefresh-seconds
Example: /httprefresh-120
866 GroupWise 8 Administration Guide