Enabling Autoupdate In Consoleone - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

This entry is ignored if
can decline indefinitely.
3d (Conditional) If you are using SetupIP, as described in
Client Software Installation from a Web Server," on page
SetupIPEnabled=Yes
4 Change other setup configuration entries as needed.
For information about other entries in the
the Setup Configuration File," on page
5 Save the
6 Copy the updated
it is in the same directory with the
If you want different settings for users who are installing from a Web server, you can create
another customized
you created on your Web server in
Installation from a Web Server," on page
7 Continue with

70.1.7 Enabling AutoUpdate in ConsoleOne

1 Log in to ConsoleOne as an Admin equivalent.
2 Click Tools > GroupWise System Operations > Software Directory Management.
3 Select the software distribution directory, then click Update.
1138 GroupWise 8 Administration Guide
ForceUpdate=No
file.
setup.cfg
file from the
setup.cfg
file and copy it to a
setup.cfg
Section 70.1.7, "Enabling AutoUpdate in ConsoleOne," on page
. If users are merely prompted to update, they
file, see
setup.cfg
1128.
directory to the
client
file.
setup.exe
subdirectory under the directory
win32
Step 1 in Section 70.1.5, "Preparing for Client Software
1134.
Section 70.1.5, "Preparing for
1134, specify:
Section 70.1.1, "Understanding
subdirectory, so that
win32
1138.