Copying And Compiling The Poa Mib File - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

4 Continue through the rest of the installation process as prompted by the Agent Installation
program.
The Agent Installation program copies the SNMP support files to the agent installation
directory, makes the appropriate Windows registry entries, and restarts the Windows SNMP
service.
5 Continue with

37.6.2 Copying and Compiling the POA MIB File

An SNMP-enabled POA returns information contained in a Management Information Base (MIB).
The MIB is an ASCII data structure that defines the information gathered. It also defines the
properties that can be monitored and managed on the SNMP-enabled POA.
Before you can monitor an SNMP-enabled POA, you must compile the gwpoa.mib file using your
SNMP management program.
NetWare and
Windows:
Linux:
1 Copy the
ZENworks Server Management users can access the
distribution directory.
2 Compile or import the
For example, to compile the
2a In ConsoleOne, right-click the Site Server object, then click Properties > MIB Pool.
2b Click Modify Pool > Add.
2c Browse to and select the
2d Click Compile.
2e Make sure that the server where the POA is running is configured to send SNMP traps to
the ZENworks Server Management Site Server.
NetWare:
Windows:
Refer to your SNMP management program documentation for specific instructions.
3 Continue with
558 GroupWise 8 Administration Guide
Copying and Compiling the POA MIB
The GroupWise MIBs are located on the GroupWise 8 DVD or downloaded GroupWise 8
image in the
\agents\snmp directory
software_distribution_directory\agents\snmp
it with the latest GroupWise software.
The GroupWise MIBs are located on the GroupWise 8 DVD or downloaded GroupWise 8
image in the /agents/snmp
file to the location required by your SNMP management program.
gwpoa.mib
gwpoa.mib
gwpoa.mib
gwpoa.mib
Add the IP address or hostname of the ZENworks Server Management Site
Server to the
traptarg.cfg
Add the IP address or hostname of the ZENworks Server Management Site
Server to the list of trap destinations. For example, in Windows Server 2003,
click Start > Control Panel > Administrative Tools > Services. Right-click SNMP
Trap Service, then click Properties. On the Traps tab, add the IP address or
hostname of the ZENworks Server Management Site Server.
Configuring the POA for SNMP
File.
or in the
directory.
gwpoa.mib
file as required by your SNMP management program.
file for ZENworks Server Management:
file, then click OK.
file in the sys:\etc directory.
Monitoring.
directory if you have updated
file in the software