Modifying Log Settings Through The Internet Agent Server Console - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

49.6.3 Modifying Log Settings through the Internet Agent
Server Console
"NetWare Internet Agent Server Console" on page 812
"Linux or Windows Internet Agent Server Console" on page 812
NetWare Internet Agent Server Console
You can use the NetWare Internet Agent console to set the logging level for the current session.
Changes you make to logging level at the console apply only to the current session. When you
restart the Internet Agent, the logging level is reset to the settings specified in ConsoleOne or the
startup switches. See
Section 49.6.2, "Modifying Log Settings through Startup Switches," on page
To modify the logging level:
1 At the NetWare Internet Agent's console, press F10-Options, then press F2-Log Level
repeatedly to toggle among the available log levels:
Off: Disables the logging function.
Normal: Displays warnings and error messages. This is the preferred logging level.
Verbose: Displays information about traffic, including non-delivery reports, in addition to
warnings and error messages. Information includes the filename, path, message ID, and
size of the message being processed; the IP address of any inbound SMTP connections;
the Internet Agent-specific MSG number; and SMTP connection messages such as
"Connect to novell.com" and "Accepted connection from 172.16.5.18 novell.com".
Diag: Displays detailed function calls made by the Internet Agent. This level is not useful
for most troubleshooting. Verbose is better for standard troubleshooting.
2 Press F1-Exit Options to return to the main console screen.
Linux or Windows Internet Agent Server Console
You can use the Windows Internet Agent console to override the following log settings for the
current sessions:
Disk logging on/off
Log file location
Logging level (applies to both console logging and disk logging)
Maximum age for log files
Maximum disk spaced used for log files
Changes you make to the log settings at the console apply only to the current session. When you
restart the Internet Agent, the log level is reset to the level specified in ConsoleOne or the startup
switches. See
Section 49.6.2, "Modifying Log Settings through Startup Switches," on page
To modify the log settings:
1 In the Windows Internet Agent console, click Log > Log Settings to display the Log Settings
dialog box.
812 GroupWise 8 Administration Guide
Section 49.6.1, "Modifying Log Settings in ConsoleOne," on page 810
Section 49.6.1, "Modifying Log Settings in ConsoleOne," on page 810
and
811.
and
811.