Configuring Polling Of Monitored Agents - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

5 Click OK to put the new SNMP settings into effect.
6 Make sure the GroupWise agents you want to monitor using SNMP are enabled for SNMP. See
Section 37.6.1, "Setting Up SNMP Services for the POA," on page 555
"Setting Up SNMP Services for the MTA," on page
followed for all GroupWise 5.x, 6.x, 7, and 8 agents.

63.4 Configuring Polling of Monitored Agents

By default, the Monitor Agent polls all monitored agents every five minutes. You can adjust the poll
cycle as needed.
At the Windows Monitor Agent server
1 Select the root agent group to set the poll cycle default for all monitored agents.
or
Select any agent group to set the poll cycle for the agents in the selected group.
or
Select any agent to set the poll cycle for that individual agent.
2 Click Configuration > Poll Settings.
or
At the Linux Monitor Agent Web
Setup, then scroll down to the HTTP Settings section.
Unless you selected the root agent group, Use Parent Notification Options is selected and all
options are dimmed. Deselect Use Parent Notification Options to set up e-mail notification for
an agent group.
3 Increase or decrease the poll cycle as needed, then click OK.
683. The same instructions can be
console:
console, select one ore more agents, click Preferences >
and Section 42.6.1,
Configuring the Monitor Agent 1017