Novell GROUPWISE 8 - ADMINISTRATION Administration Manual page 896

4 Define the following properties:
Access Mode: The access mode determines whether the WebAccess Agent uses client/server
access, direct access, or both client/server and direct access to connect to the post office. With
client/server and direct, the WebAccess Agent first tries client/server access; if client/server
access fails, it then tries direct access. You can also choose to use the same access mode
currently defined for the post office (on the Post Office object's Post Office Settings page). The
current access mode is displayed in the Current Post Office Access field.
Direct Access: When connecting to the post office in direct mode, the WebAccess Agent can
use the post office's UNC path (as defined on the Post Office object's Identification page) or a
mapped path that you specify.
Client/Server Access: When connecting to the post office in client/server mode, the
WebAccess Agent must know the hostname (or IP address) and port number of the Post Office
Agent running against the post office.
5 Click OK.
6 Repeat
Automating Reattachment to NetWare Servers
You can specify the reattach information for the Windows WebAccess Agent in ConsoleOne.
Whenever the Windows WebAccess Agent loses its connection to a post office that is on a NetWare
server, it reads the reattach information from the domain database and attempts to reattach to the
NetWare server.
The NetWare WebAccess Agent does not use this information. To reattach to NetWare servers
where users' post offices reside, the NetWare WebAccess Agent uses the user ID and password
specified during installation. This user ID and password are specified in the
To specify the reattachment information for the NetWare WebAccess Agent:
1 In ConsoleOne, right-click the WebAccess Agent object, then click Properties.
2 Click Reattach > Settings.
896 GroupWise 8 Administration Guide
Step 3 through Step 5 for each post office whose link you want to change.
file
strtweb.ncf