Display Bgp Peer - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol
Field
As-path

5.1.14 display bgp peer

Syntax
display bgp [ multicast ] peer [ ip-address [ verbose ] ]
display bgp [ multicast ] peer [ verbose ]
View
Any view
Parameter
multicast: Specifies multicast address family.
ip-address: IP address of the peer to be displayed.
verbose: Displays detailed information of the specified peer.
Description
Use the display bgp peer command to display the information about the specified
BGP peer.
Example
# Display detailed information of the peer 10.110.25.20.
<3Com> display bgp peer 10.110.25.20 verbose
Configuration within the peer :
no export policy route-policy
The route is learned from exterior gateway protocol
EGP
(EGP).
Short for INCOMPLETE: indicates that the original
source of the route information is unknown (learned by
INC
other methods). BGP sets the origin of the route
imported through other IGP protocols as INCOMPLETE
AS-path attribute of route, which records all AS areas that the
route passes. With it, route loop can be avoided
Peer: 10.110.25.20 Local: Unspecified
Type: External
State: Idle Flags: <Idled>
Last State: NoState
Last Error: None
Options: <>
Chapter 5 BGP Configuration Commands
Description
Last Event: NoEvent
5-13