Configure Frame Relay Traffic Shaping - 3Com 3032 Configuration Manual

Configure Frame Relay
Traffic Shaping
Table 299 Create/Delete a Frame Relay class
Operation
Create a Frame Relay class
Delete a Frame Relay class
By default, no Frame Relay class is created.
After creating the Frame Relay class using this command, the user will enter the
frame relay class view under which you can configure the parameters like CIR.
2 Associate the Frame Relay class with the Frame Relay interface or a PVC
Please configure the association between a Frame Relay class and an interface in
interface view, and configure the association between a Frame Relay class and a
PVC in DLCI view.
Table 300 Associate the Frame Relay class with the Frame Relay interface or a PVC
Operation
Associate a Frame Relay class with a Frame
Relay interface or PVC
Remove the association between a Frame Relay
class and a Frame Relay interface or PVC
By default, no Frame Relay class is associated with the Frame Relay interface or the
Frame Relay PVC.
When using the command
exist, this command will first create a Frame Relay class (but not enter the frame
relay class view) and then associate it with the current interface or PVCs.
The command
undo fr-class
Frame Relay class and the interface/PVCs without deleting the actual Frame Relay
class. In this case, if using the
view the configurations of the router, you can still see the configuration of the
Frame Relay class. To delete the Frame Relay class, use the
command.
When a Frame Relay PVC implements QoS, it will search for the corresponding
Frame Relay class in the following sequence:
If there is a Frame Relay class associated with the PVC, use the QoS parameters
configured to the Frame Relay class.
If there is no Frame Relay class associated with the PVC but a Frame Relay class
associated with the interface to which the PVC belongs, use the QoS
parameters configured to this Frame Relay class.
3 Configure the Frame Relay class parameters
In frame relay class view, the user can configure the parameters for the QoS, such
as Frame Relay traffic shaping, Frame Relay traffic policing, Frame Relay
congestion management, and Frame Relay queueing management. The following
sections will cover the parameter settings in detail.
Frame Relay traffic shaping configuration includes:
Enable the Frame Relay traffic shaping
Create a Frame Relay class
Associate the Frame Relay class with the Frame Relay interface or a PVC
Command
fr class class-name
undo fr class class-name
Command
fr-class class-name
undo fr-class class-name
, if the specified Frame Relay class does not
fr-class
will remove the association between the specified
display current-configuration
Configure Frame Relay QoS
command to
undo fr class
263