Omron R88D-KTA5L User Manual page 239

General-purpose Control Cables (R88A-CPG@S)
This is a cable attached to the connector to be connected to the drive's control I/O connector
(CN1). The connector for the controller is not provided. When connecting to a Position Control
Unit which does not have a specified cable or connecting to another company's controller,
prepare wiring suited for the controller to be connected.
 When connecting to a controller which does not have a specified cable, either use a general-
purpose control cable or a connector-terminal block cable and a connector-terminal block.
Cable types
Model
R88A-CPG001S
R88A-CPG002S
Connection configuration and external dimensions
Controller side
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
3-4 Cable and Connector Specifications
Outer diameter of
Length (L)
1 m
12.8 dia.
2 m
L
Weight
sheath
Approx. 0.3 kg
Approx. 0.6 kg
39
Servo Drive side
R88D-K@
t = 18
3
3-120