Reset Saved-Configuration; Restore Startup-Configuration - HP 6125G Command Reference Manual

reset saved-configuration

Syntax
reset saved-configuration [ backup | main ]
View
User view
Default level
3: Manage level
Parameters
backup: Deletes the backup next-startup configuration file.
main: Deletes the main next-startup configuration file.
Description
Use reset saved-configuration to delete next-startup configuration files.
Delete the next-startup configuration file if it does not match the software version or has been corrupted.
Use this command with caution. This command permanently deletes the next-startup configuration files
from all IRF member devices.
You can delete the main, the backup, or both. If the device has only one next-startup configuration file,
the system sets the attribute of the configuration file to NULL instead of deleting the file.
If no configuration file attribute is specified, the reset saved-configuration command deletes the main
startup configuration file.
Related commands: display saved-configuration and save.
Examples
# Delete the next-startup configuration file from the storage media of the device.
<Sysname> reset saved-configuration backup
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in flash is being cleared.
Please wait ...
..
MainBoard:
Configuration file is cleared.
Slot 2:
Erase next configuration file successfully

restore startup-configuration

Syntax
restore startup-configuration from src-addr src-filename
View
User view
Default level
3: Manage level
115