Display Saved-Configuration - HP 6125G Command Reference Manual

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display default-configuration to display the factory defaults.
The device is shipped with some basic settings called "factory defaults." These default settings make sure
the device can start up and run normally when it has no configuration file or the configuration file is
corrupted.
Factory defaults vary with device models and might differ from the default settings of commands.
Related commands: display current-configuration and display saved-configuration.
Examples
# Display the factory defaults of the device. The factory defaults vary with switch models. The output is not
shown here.
<Sysname> display default-configuration
#
domain default enable system
#
telnet server enable
#
undo ip redirects
undo ip ttl-expires
undo ip unreachables
#
vlan 1
#
radius scheme system
server-type extended
primary authentication 127.0.0.1 1645
primary accounting 127.0.0.1 1646
user-name-format without-domain
#
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
#
---- More ----

display saved-configuration

Syntax
display saved-configuration [ by-linenum ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level
110