C
H A P T E R
Virtual Channel Management
This chapter shows you how to use commands to configure virtual channels.
54.1 Virtual Channel Management Overview
See
Chapter 13 on page 103
54.2 Virtual Channel Profile Commands
Use the following commands to configure virtual channel profiles.
54.2.1 Show Virtual Channel Profile Command
Syntax:
ras> shdsl vcprofile show [profile]
where
[profile]
Displays the settings of the specified virtual channel profile (or all of them if you do not
specify one).
54.2.2 Set Virtual Channel Profile Command
Syntax:
ras> shdsl vcprofile set <vcprofile> <vc|llc> <ubr|cbr> <pcr> <cdvt>
ras> shdsl vcprofile set <vcprofile> <vc|llc> <vbr(rt-vbr)|nrt-vbr> <pcr>
<cdvt> <scr> <bt>
where
<vcprofile>
<vc|llc>
IES-708-22A User's Guide
for background information on virtual channels and ATM QoS.
The name of the virtual channel profile (up to 31 English
=
keyboard characters).
The name of the virtual channel profile (up to 31 English
=
keyboard characters). You cannot change the name of the
DEFVAL or DEFVAL_VC profiles.
The type of encapsulation (vc or llc).
=
54
345