Log Command Example; Figure 267 Log Command Example - ZyXEL Communications Prestige 2602R Series User Manual

Log Command Example

This example shows how to set the Prestige to record the access logs and alerts and then view
the results.

Figure 267 Log Command Example

ras> sys logs load
ras> sys logs category access 3
ras> sys logs save
ras> sys logs display access
# .time
message
7|01/01/2000 09:40:13 |192.168.1.1:3
RWARD
Router reply ICMP packet: ICMP(type:3, code:1)
8|01/01/2000 09:40:07 |192.168.1.1:3
RWARD
Router reply ICMP packet: ICMP(type:3, code:1)
9|01/01/2000 09:40:04 |192.168.1.1:3
RWARD
Router reply ICMP packet: ICMP(type:3, code:1)
10|01/01/2000 09:40:04 |192.168.1.33:1199
RWARD
Firewall default policy: TCP (L to W)
11|01/01/2000 09:40:04 |192.168.1.1:53
RWARD
none: UDP
Appendix K Log Descriptions
source
Prestige 2602R Series User's Guide
destination
|192.168.1.33:1
|192.168.1.33:1
|192.168.1.33:1
|207.69.188.186:110
|192.168.1.33:1200
notes
|ACCESS FO
|ACCESS FO
|ACCESS FO
|ACCESS FO
|ACCESS FO
437