Chapter 32 System Remote Management
This command displays FTP settings.
Router# configure terminal
Router(config)# show ip ftp server status
active
port
certificate: default
TLS
service control:
No.
Zone
========================================================================
32.8 SNMP
Simple Network Management Protocol is a protocol used for exchanging management
information between network devices. Your NXC supports SNMP agent functionality, which
allows a manager station to manage and monitor the NXC through the network. The NXC
supports SNMP version one (SNMPv1) and version two (SNMPv2c).
32.8.1 Supported MIBs
The NXC supports MIB II that is defined in RFC-1213 and RFC-1215. The NXC also
supports private MIBs (AAT-private-lol.mib) to collect information about CPU and memory
usage. The focus of the MIBs is to let administrators collect statistical data and monitor status
and performance. You can download the NXC's MIBs from www.zyxel.com.
32.8.2 SNMP Traps
The NXC will send traps to the SNMP manager when any one of the following events occurs:
Table 106 SNMP Traps
OBJECT LABEL
Cold Start
linkDown
linkUp
authenticationFailure
194
: yes
: 21
: no
Address
OBJECT ID
1.3.6.1.6.3.1.1.5.1
1.3.6.1.6.3.1.1.5.3
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.5
DESCRIPTION
This trap is sent when the NXC is turned on or an agent
restarts.
This trap is sent when the Ethernet link is down.
This trap is sent when the Ethernet link is up.
This trap is sent when an SNMP request comes from
non-authenticated hosts.
Action
NXC CLI Reference Guide