Removal Of The Top Cover Plate Of The Light Processor Compartment - Barco ZEUS Installation And Safety Manual

16. Removal and installation of the projector covers

16.5 Removal of the top cover plate of the Light Processor compartment

To access the top cover plate of the Light Processor compartment the projector top cover has to be removed
first. This procedure assumes that the projector top cover is already removed.
C
AUTION
result in a tamper event. An authorization to clear the security warning on the projector, after closing off the
Light Processor compartment, will be needed!
Necessary tools
3mm Allen wrench.
How to remove the top cover plate from the Light Processor compartment?
1. Remove the four screws (reference 1 image 16-6) at the top of the cover plate. Use a 3mm Allen wrench.
1
Image 16-6
2. Remove the top cover plate as follows:
a) Grib the top cover plate by the two handles (reference 2 image 16-7) and slide it towards the front side (lens side) of the
projector. All latches (reference 3 image 16-7) must become free.
b) Tilt the top cover plate as illustrated.
c) Move the top cover plate away from the projector.
146
:
Opening the Light Processor compartment by removing the top cover plate or side cover plate will
R5905961 ZEUS 09/03/2015