Removal Of The Light Unit Cover - Barco HDF W22 User And Installation Manual

16. Removal and installation of the projector covers

16.3 Removal of the light unit cover

W
ARNING
Necessary tools
7 mm flat screw driver.
How to remove the light unit cover
1. Release the two captive screws at the top and bottom right side of the light unit cover, using a flat screw driver.
Image 16-5
Captive screws, unlocking
2. Remove the light unit cover from the projector as follows:
a) gently pull out the left bottom corner (A) of the light unit cover,
b) then gently pull out the left top corner (B) of the light unit cover,
c) then move the light unit cover away from the projector (C).
B
A
Image 16-6
394
:
This procedure may only be performed by qualified technical service personnel.
C
R5905158 HDF SERIES 08/12/2016