Option Board: Communication Board Ethernet Cbe20; Description; Safety Instructions - Siemens SINAMICS DCM Operating Instructions Manual

Additional system components

7.1 Option Board: Communication Board Ethernet CBE20

7.1 Option Board: Communication Board Ethernet CBE20
7.1.1

Description

The SINAMICS DC MASTER can be connected to PROFINET using the Communication
Board CBE20 interface module. The module supports PROFINET IO with Isochronous
Realtime Ethernet (IRT) and PROFINET IO with RT. Mixed operation is not permissible.
PROFINET CBA is not supported.
The option board has an X1400 interface with 4 ports for communication.
The Communication Board CBE20 allows SINAMICS Link connections to be established.
Note
By inserting the CBE20, the IF1 communication channel switches over from PROFIBUS to
PROFINET. Communication is therefor no longer possible via PROFIBUS.
7.1.2

Safety instructions

CAUTION
The Option Board should only be inserted and removed when the Control Unit and Option
Board are disconnected from the power supply.
CAUTION
The CBE20 must only be operated by qualified personnel. The ESD information must be
observed.
170
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter