Traction Drums - Toro Greensmaster eFlex 1800 Service Manual

Traction Drums

g204319
1. Differential assembly
2. Drum shaft
3. Square key (2 each)
4. Thrust washer
5. Straight bushing (2 each)
6. Traction lever
7. Flange bushing (4 each)
8. Brake lever
9. Dowel pin (2 each)
10. Drum drive housing
Removing the Traction Drum
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
11. Straight bushing
12. Retaining ring (2 each)
13. Traction engage lever
14. Flat washer
15. Bolt
16. Washer-head screw
17. Brake lever
18. Retaining ring
19. Ball bearing (2 each)
20. O-ring
1. Park the machine on a level surface, turn the key switch to the O
and remove the key from the key switch. Disconnect the battery pack; refer
to Connecting the Lithium Battery Pack (page
2. If installed, remove the transport wheels; refer to
(page 6–21).
Figure 33
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Page 4–27 Traction and Reel Drive System: Service and Repairs
Lock collar
Pin
Long spur gear
Left side plate
Left hex shaft
Bearing nut
Left traction drum
Grease seal
Jam nut
Right traction drum
position,
FF
4–3).
Transport Wheels (Optional)