Disassembling the Differential Assembly
Greensmaster
®
eFlex 1800, 2100 and 2120
12189SL Rev E
1. Remove the differential assembly from the machine; refer to
Differential Assembly (page
g204323
1.
Cover index mark
2. Remove the 6 socket-head screws that secure the cover to the housing. For
assembly purposes, note the alignment of the index marks on the housing
and cover
(Figure
40).
3. Place the differential assembly on workbench so that the differential is resting
on the cover with the housing orientated up.
g204324
1.
Housing index mark
4. Lift the housing from the differential assembly leaving the internal components
positioned on the cover. For assembly purposes, note that the index mark on
the housing is aligned with a pin that has 1 gear
5. For assembly purposes, note the locations of the projections on the inside
of the cover. The projections need to be aligned with the pins that have 1
gear
(Figure
42).
6. Slide each pin with gears and spacers from cover. Note the location of the
gears and spacers on each of the 6 pins.
4–32).
Figure 40
2.
Housing index mark
Figure 41
2.
Pin with 2 gears
Page 4–35
Traction and Reel Drive System: Service and Repairs
Removing the
3.
Pin with 1 gear
(Figure
41).