Toro Greensmaster eFlex 1800 Service Manual page 34

Diameter/Circumference Measuring Tape
Toro Part No. TOR6023
Spring steel measuring tape for accurately measuring the
circumference and outside diameter of cutting reel and
other spherical components. Tape calibration is in fixed inch
readings (no adjustments).
Roller Rebuilding Tools
The following combination of washers and spacers can be
used to install bearings and seals into the front and rear
rollers (2 each required).
Bearing installation washer: 107-8133 (black)
Seal installation spacer: 107-3505
Seal installation washer: 104-6126 (yellow)
Toro Part No. TOR4105
As an alternative to using the washers and spacer listed
above, this special tool set can be used to install bearings
and seals into the front and rear rollers.
Turf Evaluator Tool
Toro Part No. 04399
Many turf discrepancies are subtle and require closer
examination. In these instances, the Turf Evaluator grass
viewing tool is helpful. It can assist turf managers and service
technicians in determining causes for poor reel mower
performance and in comparing the effective height-of-cut of
one mowed surface to another. This tool should be used with
the Toro Guide to Evaluation Reel Mower Performance and
Using the Turf Evaluator (Toro part no. 97931SL) available
from your local authorized Toro Distributor.
Specifications and Maintenance: Special Tools Page 2–18 Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E