Toro Greensmaster eFlex 1800 Service Manual page 48

Transmission Belt Tensioner (continued)
Traction and Reel Drive System: General Information
Be careful when rotating the transmission engage/disengage lever.
The lever is spring loaded and may cause personal injury.
3. To disengage the spring loaded idler from the transmission drive belt, use a
3/8 inch wrench to rotate the engage/disengage shaft 1/4 turn clockwise.
4. To engage the idler into the transmission drive belt, use a 3/8 inch wrench
to rotate the engage/disengage shaft 1/4 turn counterclockwise. The
transmission belt is properly tensioned when the alignment marks on the
engage/disengage shaft and the transmission cover are aligned
5. Connect the battery pack; refer to
(page 4–3).
CAUTION
Connecting the Lithium Battery Pack
Page 4–6
(Figure
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
13).