Traction Bail Replacement
Traction Bail Removal
Traction Bail Installation
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
1. Park the machine on a level surface. Stop the engine and wait for all moving
parts to stop. Shut the fuel off.
2. Remove the grass bagger assembly if attached.
3. Remove the 1/4–20 shoulder bolt and nut securing the cable to the traction
bail.
g302449
4. Remove traction bail by pushing inward on one side and lifting away from
the handle assembly.
g302451
1. Install the traction bail to the top hole of the handle assembly.
Figure 48
Figure 49
Page 5–11
Controls: Service and Repairs