Toro Greensmaster eFlex 1800 Service Manual page 65

Installing the Drum Drive Belt (continued)
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
5. Ensure that the wave washer (item 2 in
the drum drive cover.
6. Position new gasket (item 17 in
7. Slide the drum drive cover onto the drum drive assembly.
8. Install the 7 washer-head screws (item 1 in
the housing. Tighten the screws as follows:
A. First, use an alternating crossing pattern, torque all the screws to 1.7 to
4.5 N∙m (15 to 40 in-lb).
B. Again use an alternating crossing pattern, torque all the screws to 9.6 to
10.7 N∙m (85 to 95 in-lb).
g203650
1. Traction lever (engaged)
9. Rotate the traction engage/disengage lever to the engaged position to
tension the drum drive belt
10. Install the rail kit wheels if they were attached; refer to
(Optional) (page 6–24).
11. Install the transport wheels if they were attached; refer to
(Optional) (page 6–21).
12. Connect the battery pack; refer to
(page 4–3).
Figure
Figure 28) to the housing surface.
Figure 30
2. Right handle clamp
(Figure 30).
Connecting the Lithium Battery Pack
Page 4–23 Traction and Reel Drive System: Service and Repairs
28) is pressed into the bore of
Figure 28) to secure the cover to
Rail Kit Wheels
Transport Wheels