Toro Greensmaster eFlex 1800 Service Manual page 286

Removing the Gear Box Assembly (continued)
Universal Groomer (Optional): Service and Repairs
4. Remove the gear box from the cutting unit as follows:
A. Turn the input shaft in the correct direction to loosen it from the reel.
B. Remove the cotter pin (item 3 in
height adjustment rod at the front of the groomer gear box. Discard the
cotter pin.
C. Continue to unscrew the input shaft and remove the gear box from the
cutting unit.
Figure
Page 9–6
217) and clevis pin from the
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E