Toro Greensmaster eFlex 1800 Service Manual page 74

Removing the Differential Assembly
Traction and Reel Drive System: Service and Repairs
1. Park the machine on a level surface, turn the key switch to the O
and remove the key from the key switch. Disconnect the battery pack; refer
to Connecting the Lithium Battery Pack (page
2. Remove the traction drums from the machine; refer to
4–27).
g203654
1. Spur gear assembly
3. Slide the spur gear assembly from the differential assembly in the drum drive
housing (Figure 37).
g203655
1. Flange bushing
2. Spur gear
4. If necessary, disassemble the spur gear assembly
A. The hex shaft has left-hand threads. The shaft also has thread-locking
compound on threads.
B. Press the ball bearing and flange bushing from the spur gear as
necessary.
Figure 37
2. Drum drive housing
Figure 38
3. Ball bearing
4. Hex shaft (left-hand threads)
Page 4–32
FF
4–3).
Traction Drums (page
(Figure 38).
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
position,