Installing the Cutting Unit Assembly (continued)
Cutting Unit: Service and Repairs
Note: The parallel position of the rear roller to the cutting unit is controlled
by the precision machined crossmember and side plates of the cutting
unit. If necessary, the cutting unit side plates can be loosened and a slight
adjustment can be made to parallel the rear roller with the cutting unit; refer
to
Leveling the Rear Roller (page
11. Install the reel pulley, belt, and reel drive cover to the reel drive assembly;
refer to
Chapter 4: Traction and Reel Drive System (page 4–1)
to install and adjust these components.
12. Install the cutting unit to the machine.
13. After all necessary adjustments have been made, connect the battery pack;
refer to
Connecting the Lithium Battery Pack (page
7–7).
Page 7–30
for procedure
7–3).
Greensmaster
®
eFlex 1800, 2100 and 2120
12189SL Rev E