Toro Greensmaster eFlex 1800 Service Manual page 31

Battery Terminal Protector
Toro Part No. 107-0392
Use this aerosol spray on the battery terminals, ring
terminals, and fork terminals to reduce corrosion
problems. Apply the terminal protector to the connection
after you secure the battery cable, ring terminal, or fork
terminal.
Dielectric Gel
Toro Part No. 107-0342
Use the dielectric gel to prevent corrosion of unsealed
connection terminals. To ensure complete coating of the
terminals, liberally apply the gel to the component and wire
harness connector, plug the connector into the component,
unplug the connector, apply the gel to both surfaces again,
and connect the harness connector to the component again.
The connectors must be fully packed with gel for effective
results.
Note: Do not use the dielectric gel on the sealed connection
terminals as the gel can unseat the connector seals during
assembly.
Gauge Bar Assembly
Toro Part No. 94–9010
Use gauge bar to verify height-of-cut adjustment.
Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E
Page 2–15 Specifications and Maintenance: Special Tools